Best for
New-machine or controller-upgrade decisions
Press Brake Upgrade
CNC Control Systems
Choose CNC controls for the programming, axes and operator tasks your machine requires. Compare Delem, Cybelec and ESA options.
Compare
DELEM, CYBELEC and ESA control options
Confirm
Axes, sensors, software, data and operator workflow
Information Needed
Start With the Existing Machine and the Parts It Makes
Send the current controller, axes, programming method, machine options and operator tasks.
01 / PART
Part and Program
Describe geometry, bend sequence, repeat work, drawing import and required graphical support.
02 / MACHINE
Machine Interfaces
List ram, backgauge, crowning, safety, angle-measurement and drive interfaces.
03 / PEOPLE
Operator Workflow
Describe setup, offline preparation, training, data transfer and the screens operators need.
Controller options
Compare Interfaces and Programming Depth
Compare programming, simulation, controlled axes and machine interfaces on the model cards. The controller version and the machine’s drives, sensors and installed options determine the functions available on the finished press.
DELEM DA53T Touch
Enter bends numerically on the touchscreen. The DA-53T supports up to four axes, including Y1/Y2 and two auxiliary axes. Check the X and R or Z backgauge arrangement, valve type and crowning interface. TandemLink is optional.
Download technical PDF →
DELEM DA58T 2D Graphical
Draw and simulate the profile in 2D with automatic bend sequencing. The DA-58T controls Y1/Y2 and X, with R or Z as a second backgauge axis. Verify the backgauge and crowning connections for the machine.
Download technical PDF →
DELEM DA66T Touch 2D
Program the part in 2D and simulate the machine, tooling and bend sequence in 3D. Axis count depends on the installed control modules. Verify axis feedback and any angle-correction interface.
Download technical PDF →
DELEM DA69T Touch 3D
Program the part in 2D or 3D and check the tool setup and possible collisions in a 3D machine simulation. Confirm the configured axes, I/O modules and licensed functions against the press configuration.
Download technical PDF →
CYBELEC CybTouch 8 PS
Enter bend data numerically on the three-axis control. A fourth axis and 2D profile drawing with manual sequencing are separate options. Check the installed axis count and programming options for the ordered press.
Download technical PDF →
CYBELEC CybTouch 12 PS
Draw a profile in 2D and set the bend sequence manually. Automatic sequencing is optional. The four axes are Y1/Y2, X and R. Check encoder, drive and valve interfaces against the existing machine.
Download technical PDF →
CYBELEC CybTouch 15 PS
Draw profiles in 2D and calculate the bend sequence automatically. The four-axis package can be configured for six axes. Optional Z1/Z2 requires the CybMVA module for Y1/Y2. Check drive compatibility.
Download technical PDF →
CYBELEC VisiTouch 19
The S-CNC-34PS2 package includes four axes and 2D programming and simulation. CANopen links the control to the axis drives. Specify the axis layout and any VisiTouch 19 or MX offline software required.
Download technical PDF →
ESA S630
ESA S630. Confirm the programming functions, axes and interfaces required for your machine.
ESA S640
ESA S640. Check the model’s supported functions against your bending workflow.
ESA S650W
ESA S650W. Ask ADH for the applicable specification and configuration.
ESA S860
ESA S860. Confirm software, licences and machine compatibility.
ESA S875
ESA S875. Review the required machine functions and operator workflow with ADH.
Before You Order
Confirm the Complete Control Architecture
The screen is only one part of the control system. Confirm axes, drives, feedback, safety, tooling workflow, data transfer and operator acceptance together.
- Axes and feedback
- Programming and file transfer
- Safety, measurement and automation interfaces
- Training, data and acceptance tests
Upgrade path
Plan Your Machine Upgrade
Identify the production problem, check compatibility, then agree installation and acceptance.
STEP 01
Document the current state
Record machine, controller, interfaces, photos, workflow and the production issue to solve.
STEP 02
Define the requirement
Connect workpieces, process, operator tasks, output and site conditions to the upgrade.
STEP 03
Confirm compatibility
Review mechanical, electrical, control, software, safety and service interfaces.
STEP 04
Agree the scope
Define installation, tests, acceptance, documentation, training and support responsibilities.
Before You Contact ADH
CNC Control Questions
Controller fit depends on the machine architecture, interfaces and intended workflow.
Can this CNC control selection be used on an existing machine?
A retrofit is possible only when electrical, motion, feedback and safety interfaces can be matched and tested.
What information should I send?
Send machine model, current controller, axes, electrical information, part mix, drawings and programming workflow.
What determines compatibility?
Compare controller, axis/drive interfaces, feedback, I/O, safety and program transfer as one system.
What should the quotation clarify?
The quotation should name controller, licenses, hardware, interfaces, installation, tests, training and service terms.
Project enquiry
Discuss your project
Tell us what you want to make or improve. Technical details and drawings can follow.
- Material, thickness and part size
- Drawings and production volume
- Location and project timing
Contact ADH
Start a machine enquiry
Name, email and a short description are enough to begin.