Feiyue Hardware
Laser-cut tower parts
Feiyue Hardware combined profile cutting and hole cutting for heavy tower components with a 20 kW ULG ground-rail laser.
Project at a glance
Customer
Feiyue Hardware
Changxing, Huzhou, Zhejiang, China
Application
Power-tower components and construction hardware
Installed equipment
ULG13035 · 20 kW · 13 × 3.5 m working area
The production challenge
Feiyue produces tower foundation parts, baseplates and heavy connection flanges. Its casebook profile identifies Q235/Q345 carbon steel, with much of the daily work in the 25–40 mm range.
Flame cutting was followed by marking out and radial drilling. Preheating, plate transfers and edge finishing added time before parts were ready for assembly.
The machine and workflow
The installed ULG13035 pairs a 20 kW laser with a 13 × 3.5 m work area. The large format allows Feiyue to load larger plates and plan nested components across the available sheet.
The laser cuts the reported tower parts’ outer profiles and bolt holes in one operation, reducing transfers to a separate drilling station.
Reported results
Higher single-shift output
50%+
Reported in the casebook for comparable order volume without extending the shift.
Configured working area
13 × 3.5 m
The installed format supports large-plate loading and nesting for tower components.
Profiles and bolt holes
One cutting operation
The reported tower-part route combines operations previously split between cutting and drilling.
ADH's casebook reports the production change above for Feiyue's workload. These are project observations, rather than a cutting-performance specification for every material and part.
Inside the customer project
Feiyue Hardware's manufacturing site in Changxing, Zhejiang.
The customer interview discusses large-plate loading and the change from separate drilling.
From the customer
The 13-metre by 3.5-metre format is very practical. We can load a whole large plate, which saves a lot of loading and unloading time.
Wu Yuefang · Business owner, Feiyue Hardware
Apply this to your parts
Share plate grades, thicknesses, bolt-hole drawings, edge requirements and loading space. Compare the full process through cutting, drilling, handling and assembly.
Source: ADH customer casebook, compiled 24 April 2026, pp. 3–9. Customer quotes are translated from the Chinese interviews.
Continue with the industry guide
Compare typical parts, production challenges and equipment choices for this application.
Discuss your production needs
Share your material, part drawing and production goal. ADH can help you compare suitable machines and processes.