Best for
Faster or more controlled tooling changeovers
Press Brake Upgrade
Tooling and Clamping
Tool standard, loading direction, tool weight and changeover frequency determine the clamping method. Match the holder, ram and pressure source before installation.
Compare
Quick, pneumatic and hydraulic clamping
Confirm
Tool tang, holder, length and machine interface
Information Needed
Start With the Tool Standard and Changeover Workflow
Describe punch tang, segment length, tool weight and the holding method required.
01 / TOOLING
Tool interface
Document punch tang, segment length, vertical or horizontal loading and retention method.
02 / CHANGEOVER
Changeover workflow
Describe frequency, tool weight, operator tasks, alignment, segmented tooling and automated-change needs.
03 / RETROFIT
Retrofit interface
List holder/ram geometry, available height, hydraulics or pneumatics, controls, guarding and tests.
Clamping options
Compare Clamping by Tooling and Changeover
The right method follows the tool interface and setup task; compare options under the same tooling and operator conditions.
Double-Sided Quick Clamp
Check the tool tang, loading direction and retention method for the double-sided quick clamp.
Wilson Pneumatic Clamping
Match the Wilson clamp to the tool standard, air supply and machine interfaces.
WILA Hydraulic Clamping
Match the WILA clamp to the tooling, hydraulic supply and machine interfaces.
Before You Order
Confirm Tooling and Holder Compatibility
Punch tang, holder, ram, pressure source and changeover method must form one compatible tooling stack.
- Punch tang and holder standards
- Vertical or horizontal loading
- Ram, hydraulic, pneumatic and control interfaces
- Retention, alignment and changeover tests
Upgrade path
Plan Your Machine Upgrade
Identify the production problem, check compatibility, then agree installation and acceptance.
STEP 01
Document the current state
Record machine, controller, interfaces, photos, workflow and the production issue to solve.
STEP 02
Define the requirement
Connect workpieces, process, operator tasks, output and site conditions to the upgrade.
STEP 03
Confirm compatibility
Review mechanical, electrical, control, software, safety and service interfaces.
STEP 04
Agree the scope
Define installation, tests, acceptance, documentation, training and support responsibilities.
Before You Contact ADH
Tool-Clamping Questions
Compatibility depends on ram and tooling interfaces, tool profile, load, changeover method and application.
Can this tool clamping system be used on an existing machine?
Check holder geometry, tool tang, available height, pressure source, controls and loading method.
What information should I send?
Send model, current holders, tooling drawings, changeover workflow, tool lengths and ram-interface photos.
What determines compatibility?
Compare ram interface, tooling profile, rated load, connection and changeover procedure.
What should the quotation clarify?
Name clamping method, hardware, tooling interface, installation, tests, training and service terms.
Project enquiry
Discuss your project
Tell us what you want to make or improve. Technical details and drawings can follow.
- Material, thickness and part size
- Drawings and production volume
- Location and project timing
Contact ADH
Start a machine enquiry
Name, email and a short description are enough to begin.